How To Change Project Size In Premiere

Knowing how to change the size and the aspect ratio of your video is one of the most important nuts of video editing, the wrong aspect ratio tin cause you a lot of problems when editing and uploading your video. In this commodity, I volition guide you through the steps of changing the aspect ratio in Adobe premiere pro.

The difference between size and aspect ratio

The difference between video size and its attribute ratio can be a little confusing, only I'll make sure to clear it for y'all before we continue with the article.

The size of the video basically means the verticle and the horizontal values of the video, while the aspect ratio is the ratio between the two values. That means there tin can be ii different videos with ii different sizes but their aspect ratios are the same.

A adept example of this is the divergence betwixt a 4K video and a 1080p video, both videos have an aspect ratio of 16:9 but when information technology comes to the size the 4K video is much bigger than the 1080p 1. The 4K video is 3840×2160 pixels while the 1080p one is 1920×1080.

Types of aspect ratios

Widescreen (16:9)

This is the almost commonly used aspect ratio, it'due south used for youtube videos, movies, documentaries, and about of the videos online

Vertical (ix:16)

This type of video tin be institute in Tiktok, Instagram, youtube short, and it's the same aspect ratio of your phone when filming vertically.

Square (ane:1)

This type of aspect ratio usually takes a square form and information technology was used on the old versions of Instagram and Facebook before the recent updates.

Anamorphic (ii.forty:1)

This aspect ratio is mostly used in movies or in cinematic videos, information technology's very similar to the offset aspect ratio that we mentioned (16:9) only it is cropped from the top and button which gives it that cinematic await.

Some people call it the cinematic horizontal black bars and if yous want to learn how to achieve it and brand your video look more than cinematic keep reading because I'll talk virtually it at the terminate.

How to alter The aspect ratio

To alter the Aspect ratio in premiere pro become to File>New>Sequence>settings>Frame size if you want to open a new project, and Sequence>Sequence Settings>Frame size to change the aspect ratio of an already existing projection.

At present that you know how to modify the aspect ratio, nosotros need to discuss how to achieve certain attribute ratios past changing the horizontal and vertical values of the video

How to change the aspect ratio to 16:9 (1.85:1)

To alter the attribute ratio to xvi:9 y'all'll need to get to sequence settings as nosotros showed earlier and change the Horizant value to "3840" and the vertical to "2160" for a 4K UHD quality and for 1080p Hard disk quality modify the values to "1920" Horizontal and "1080" vertical.

How to Add together The Cinematic Horizontal Black Confined in Premiere Pro

One of the best ways to make a video look more than cinematic is by calculation horizontal blackness confined on information technology, those confined give more depth to the video and unremarkably are very useful for wide shots.

And there are 3 ways to achieve those blackness bars in premiere pro;

The first one is by but going to google and downloading the "Cinematic black bar" PNG after you lot simply drag information technology and drop information technology over your video.

The second fashion to do it is by using an adjustment layer. to do it you'll need to:

• Go to File>New>Aligning layer,
• Drag the adjustment layer over the clips y'all want to add together the black bars to
• And and so become to Furnishings>Video furnishings>Transform>Crop
• Drop the effecton the aligning layer
• Go to the effects control pannel and change the values Top and Bottom to 12%

The Third and the all-time fashion to practice it and the way that professionals in Hollywood do information technology is past changing the attribute ratio:

You'll demand to go to Sequence>Sequence settings and change the vertical value from "1080" to "803" for 1080p quality and from "2160" to "1606" for 4K quality. the black bars may non announced when working on premiere pro, simply when you lot upload information technology on another screen those black bars will appear since the groundwork of the screen is commonly black.

And the manner I got these numbers is I dividing the horizontal value of my original sequence or video by 2.39, so f you have a different value than the ones that I mention you can use this method to determine the value that works for you.

And the reason that the third manner is the best way, information technology'southward because it'southward faster while rendering since there are much fewer pixels to render and too considering information technology provides a higher quality compared to the first two methods.

Source: https://creatorsfield.com/how-to-change-the-size-and-aspect-ratio-of-your-video-in-adobe-premiere-pro-tutorial/

Posted by: brownarand1988.blogspot.com

Share this post